*
The Authentic® Flex Ring Set is also used for the Pulse pressing
technique.
The Authentic® Flex Ring Set
has been created to make pressing an even more efficient and
reliable operation. The interior of the Flex Ring produces
guide lines on the surface of the investment block that indicate
the exact location of the patterns. You can very quickly reduce
the ringless mold to retrieve the section containing the pressed
patterns.
Authentic® Flex Rings allow free expansion and have vertically
ribbed interiors that increases the surface area of the mold
for 30% faster heating and cooling. The AFR Leveling Cap and
the Base Former articulate to the Ring to produce a consistently
sized and positioned mold.
Authentic®
Flex Ring Instructions
These instructions must be followed to
achieve the desired results.
This procedure is different from the conventional paper ring
technique.
• Mix and pour the investment into
the Flex Ring in the usual manner.
• After the normal, required bench set time, remove
the Flex Ring and allow the ring to bench set for an additional
2 minutes!
• This provides the required moisture
evaporation.
• Then place the ring into
the hot oven.
.jpg)
Authentic® Flex Ring part numbers
| Part # |
100g Ring |
| #81102 |
2gm Base Former and Cap, 100 gm |
| #81103 |
AFR Flex Ring Only, 100 gm |
| |
|
| Part # |
200g Ring |
| #81104 |
Authentic® Flex Ring Set, 2 gm
Includes 200 gm Ring, Base Former and Leveling Cap |
| #81105 |
2 gm Base Former and Leveling Cap, 200 gm |
| #81106 |
AFR Flex Ring Only, 200 gm |
| #81118 |
5 gm Base Former only, 200 gm |
| |
|
| Part # |
300g Ring |
| #81107 |
AFR Flex Ring Only, 300 gm |
| #81115 |
2 gm Base Former, 300 gm |
| #81116 |
5 gm Base Former, 300 gm |
| #81117 |
Leveling Cap for 300 gm |
* NOTE: The packaging has changed
and no longer includes the cap. The cap must be purchased
in 81104 listed above.
